Wholesale Super Lowest Price Geogrid Retaining Wall Cost - Hydroxypropyl methyl cellulose (HPMC) – Xiangye Manufacturer and Supplier

Super Lowest Price Geogrid Retaining Wall Cost - Hydroxypropyl methyl cellulose (HPMC) – Xiangye

Short Description:

Product Detail

Product Tags

Feedback (2)

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Glass Wool Fiberglass , Geogrid Driveway Cost , Mirafi Geotextile , We are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.

Super Lowest Price Geogrid Retaining Wall Cost - Hydroxypropyl methyl cellulose (HPMC) – Xiangye Detail:

The HPMC Card Number Indicates The Method Instance

60FTN100000
60: Indicates the gel temperature
FTN: Said Beijing Ftern Technology Co., Ltd
100000: Represents the viscosity (mpa.s）

Technical Requirements (Implementing Standard Q / FTN001-2016)

Determination project	unit	qualification
Determination project	unit	60FTN	65FTN	75FTN
Hydroxypropyl oxygen group	%	7.0-12.0	4.0-7.5	4.0-12.0
methoxy group	%	28-30	27-30	19-24
Gel temperature	℃	58-64	62-68	70-90
dynamic viscosity	mPa ・ s	See 4.3 viscosity range table
loss on drying	%	≤5
ash content	%	≤5
pH price	/	5.0-8.0

Adhesion specifications

specifications	dynamic viscosity (20℃)
4000	3,600-4,400 (2% aqueous solution, NDJ-1 viscometer, 3-rotor, 12 RPM)
6000	5600-6400 (2% aqueous solution, NDJ-1 viscometer, 3-rotor 12 RPM)
40000	35,000-45,000 (2% aqueous solution, NDJ-1 viscometer, 4-rotor, 6 rotational speed)
60000	55,000-65,000 (2% aqueous solution, NDJ-1 viscometer, 4-rotor, 6 rotational speed)
80000	75,000-85,000 (2% aqueous solution, NDJ-1 viscometer, 4-rotor, 6 rotational speed)
100000	85,000-10,0,000 (2% aqueous solution, NDJ-1 Viscometer, 4-rotor-6 RPM)
150000	8500-11000 (1% aqueous solution, NDJ-1 viscometer, 3-rotor, 6 RPM)
200000	> 13,000 (1% aqueous solution, NDJ-1 viscometer, 3-rotor, 6 rotational speed)

Note: a 2% aqueous solution, 20Adhesion at ℃, 1% aqueous solution 20Adhesion at ℃

Physicochemical Property

1. Appearance: white powder, not smelly and tasteless.
2. Granularity: the pass rate of 100 entries is greater than 98.5%; the pass rate of 80 entries is greater than 100%.
3. Carboization temperature: 280-300℃.
4. Surface density: 0.25-0.70g/cm³(Usually at 0.5g / cm³Left and right), with the proportion of 1.26-1.31.
5. Discolored color temperature: 190-200℃.
6. Surface tension: At 25℃, the 2% aqueous solution is 42-56dyn / cm.
7. Solubility: dissolved in water and some organic solvents, such as an appropriate proportion of ethanol / water, propane alcohol / water, dioxethane, etc.Aqueous solutions have surface activity, high transparency and stable performance.The solubility varies with the viscosity. The lower the viscosity, the greater the solubility, the performance of HPMC varies between different specifications, and the appearance dissolution of HPMC in water is not affected by the pH value.
8. HPMC decreases with methoxy content, increased gel point, decreased water solubility, and also decreased surface activity.
9. HPMC also has the ability of thickening, low gray salt discharge, pH stability, water retention, excellent membranogenesis, as well as a wide range of enzyme resistance, dispersion and adhesion.
10. Surface activity: The HPMC aqueous solution has a surfactant function, and can be used as a colloidal protective agent, emulsifier and dispersant.
11. Thermal gel: When the HPMC aqueous solution is heated to a certain temperature, it becomes opaque. The gel forms precipitation, but in continuous cooling, it returns to the original solution state.And the temperature at which this gel and precipitation take place depends mainly on their type, concentration, and heating rate.
12. pH stability: The viscosity of HPMC aqueous solution is almost not affected by acid or base, and the pH value is relatively stable in the range of 3.0-11.0.Therefore, the viscosity of the solution stabilizes during the long-term storage process.
13. Water conservation: HPMC is a high-efficiency water conservation agent.Products are widely used in building materials, food, cosmetics, and many other aspects.
14. Membranicity: HPMC can form a transparent, tough and flexible thin film that can excellently prevent the infiltration of oil.Application in food, this property is often used to maintain water during the cooling period and adsorbed oil.
15. Binding: It can be used as an adhesive for pigment, paint and paper, but also in paint and adhesive.

Main Uses

Product detail pictures:

Related Product Guide:

Our objective is to present premium quality products at aggressive prices, and top-notch services to buyers around the world. We have been ISO9001, CE, and GS certified and strictly adhere to their excellent specifications for Super Lowest Price Geogrid Retaining Wall Cost - Hydroxypropyl methyl cellulose (HPMC) – Xiangye , The product will supply to all over the world, such as: Cambodia, Azerbaijan, Mexico, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

Biaxial Geogrid