Wholesale Good Wholesale Vendors Plasticizer And Superplasticizer In Concrete - Hydroxypropyl methyl cellulose (HPMC) – Xiangye Manufacturer and Supplier

Good Wholesale Vendors Plasticizer And Superplasticizer In Concrete - Hydroxypropyl methyl cellulose (HPMC) – Xiangye

Short Description:

Product Detail

Product Tags

Feedback (2)

Sticking for the principle of "Super Quality, Satisfactory service" ,We have been striving for being a superb small business partner of you for Non Woven Geotextile Membrane , Waterproof Insulation Board , Filament Geotextile , We are hunting ahead to building positive and beneficial links with the businesses round the globe. We warmly welcome you to definitely call us to begin discussions on how we can easily bring this into being.

Good Wholesale Vendors Plasticizer And Superplasticizer In Concrete - Hydroxypropyl methyl cellulose (HPMC) – Xiangye Detail:

The HPMC Card Number Indicates The Method Instance

60FTN100000
60: Indicates the gel temperature
FTN: Said Beijing Ftern Technology Co., Ltd
100000: Represents the viscosity (mpa.s）

Technical Requirements (Implementing Standard Q / FTN001-2016)

Determination project	unit	qualification
Determination project	unit	60FTN	65FTN	75FTN
Hydroxypropyl oxygen group	%	7.0-12.0	4.0-7.5	4.0-12.0
methoxy group	%	28-30	27-30	19-24
Gel temperature	℃	58-64	62-68	70-90
dynamic viscosity	mPa ・ s	See 4.3 viscosity range table
loss on drying	%	≤5
ash content	%	≤5
pH price	/	5.0-8.0

Adhesion specifications

specifications	dynamic viscosity (20℃)
4000	3,600-4,400 (2% aqueous solution, NDJ-1 viscometer, 3-rotor, 12 RPM)
6000	5600-6400 (2% aqueous solution, NDJ-1 viscometer, 3-rotor 12 RPM)
40000	35,000-45,000 (2% aqueous solution, NDJ-1 viscometer, 4-rotor, 6 rotational speed)
60000	55,000-65,000 (2% aqueous solution, NDJ-1 viscometer, 4-rotor, 6 rotational speed)
80000	75,000-85,000 (2% aqueous solution, NDJ-1 viscometer, 4-rotor, 6 rotational speed)
100000	85,000-10,0,000 (2% aqueous solution, NDJ-1 Viscometer, 4-rotor-6 RPM)
150000	8500-11000 (1% aqueous solution, NDJ-1 viscometer, 3-rotor, 6 RPM)
200000	> 13,000 (1% aqueous solution, NDJ-1 viscometer, 3-rotor, 6 rotational speed)

Note: a 2% aqueous solution, 20Adhesion at ℃, 1% aqueous solution 20Adhesion at ℃

Physicochemical Property

1. Appearance: white powder, not smelly and tasteless.
2. Granularity: the pass rate of 100 entries is greater than 98.5%; the pass rate of 80 entries is greater than 100%.
3. Carboization temperature: 280-300℃.
4. Surface density: 0.25-0.70g/cm³(Usually at 0.5g / cm³Left and right), with the proportion of 1.26-1.31.
5. Discolored color temperature: 190-200℃.
6. Surface tension: At 25℃, the 2% aqueous solution is 42-56dyn / cm.
7. Solubility: dissolved in water and some organic solvents, such as an appropriate proportion of ethanol / water, propane alcohol / water, dioxethane, etc.Aqueous solutions have surface activity, high transparency and stable performance.The solubility varies with the viscosity. The lower the viscosity, the greater the solubility, the performance of HPMC varies between different specifications, and the appearance dissolution of HPMC in water is not affected by the pH value.
8. HPMC decreases with methoxy content, increased gel point, decreased water solubility, and also decreased surface activity.
9. HPMC also has the ability of thickening, low gray salt discharge, pH stability, water retention, excellent membranogenesis, as well as a wide range of enzyme resistance, dispersion and adhesion.
10. Surface activity: The HPMC aqueous solution has a surfactant function, and can be used as a colloidal protective agent, emulsifier and dispersant.
11. Thermal gel: When the HPMC aqueous solution is heated to a certain temperature, it becomes opaque. The gel forms precipitation, but in continuous cooling, it returns to the original solution state.And the temperature at which this gel and precipitation take place depends mainly on their type, concentration, and heating rate.
12. pH stability: The viscosity of HPMC aqueous solution is almost not affected by acid or base, and the pH value is relatively stable in the range of 3.0-11.0.Therefore, the viscosity of the solution stabilizes during the long-term storage process.
13. Water conservation: HPMC is a high-efficiency water conservation agent.Products are widely used in building materials, food, cosmetics, and many other aspects.
14. Membranicity: HPMC can form a transparent, tough and flexible thin film that can excellently prevent the infiltration of oil.Application in food, this property is often used to maintain water during the cooling period and adsorbed oil.
15. Binding: It can be used as an adhesive for pigment, paint and paper, but also in paint and adhesive.

Main Uses

Product detail pictures:

Related Product Guide:

Usually customer-oriented, and it's our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for Good Wholesale Vendors Plasticizer And Superplasticizer In Concrete - Hydroxypropyl methyl cellulose (HPMC) – Xiangye , The product will supply to all over the world, such as: Italy, Jamaica, Indonesia, What is good price? We provide customers with factory price. In the premise of good quality, efficiency must be paid attention to and maintain appropriate low and healthy profits. What is a fast delivery? We make the delivery according to customers' requirements. Although delivery time depends on the order quantity and the complexity of it, we still try to supply products in time. Sincerely hope we could have long term business relationship.

Chemical Admixtures For Concrete